CanopyFlasher

Forward facing Visual Awareness Light system.

Six extremely bright red or white CREE™ LEDs (±4000-4500 Lumen!) built into an elegant, low profile Space Grey (Nextel like) enclosure, mounted in the front of the canopy. Out of sight for you, but not for others.

New improved lens-array, focusing more light to the most dangerous angle.

AeroFlash is well visible at distances of over 3500m. Two status LEDs instantly show you which operating mode the system is in: AUTO or ON.

AeroFlash features over-temperature protection sensors built-in, with cooling heatsinks.

Suitable for many gliders with canopies opening vertically or sideways.

White or red LEDs? What is better?

After many hours of flight testing, our conclusion is that red LEDs offer the best all-round visibility in the most dangerous situations. A RED flash in a hazy/cloudy sky or white snowy background, with a white glider clearly stands out best, just like same way as one would put red warning markings on their wings. Red light warns in the most unfavourable situations and means danger.
White LEDs however are better visible on a green/brown background, but it may be likely that you would have spotted the glider already. White LEDs have the benefit that they have a slightly increased brightness compared to red…

Your choice…

Extremely smart, yet simple. Activate and forget.

Suitable for aeroclubs. Activate and forget.

An easy to understand and comprehensive installation & operation manual is available.

Update the firmware through your PC or Mac with our AeroFlash Tool.

nexus14p-1000

Connectivity - RJ12

One RJ12 IGC-compatible port for plug-and-fly connection of your Flarm. Need a splitter? No problem, we included an awesome one for free.

Aluminium Enclosure

Nexus 2 – half the size of the first Nexus. The brain of AeroFlash is built-in to an extremely compact but sturdy aluminium enclosure, shielding potential RF-interference. Update and configure Nexus through mini-USB with your PC or Mac.

Nexus 2

Nexus
-noun
“A central point linking a series of two or more objects to form a single entity”

Flarm Compatible - AUTO mode

Connect Nexus to your Flarm to have fully automatic flash activation and power-saving when you need it. Read more about the Flarm and AUTO-logic in the FAQ.

Always ON

You control when the AeroFlash system is active with “ON-mode”. Potentially dangerous situation, or the whole flight? Switch it ON!

Hazard mode

Maximum light output for extremely demanding situations which require best visibility. You enable harzard mode with 3 simple flicks of the switch, which generates the highest Flarm warning level (continuous rapid flashing) for 5 minutes.

Simply brilliant. No compromise.

FuselageFlasher

Elegant and aerodynamic. 360º. On top, bottom, or both.

Measuring at 110mm long, 15mm wide and only 11mm high, the AeroFlash FuselageFlasher is extremely elegant and streamlined, made out of a super clear UV-resistant epoxy. Its small size does not say much about its ability: with 16, yes sixteen extremely bright red or white CREE™ LEDs (±7500-8500 Lumen!), the strobe is very well visible at distances up to 3km.

Mount it on top of the fuselage, on the bottom, or BOTH! Connect up to two FuselageFlashers to Nexus. No compromise. Only one small hole of 4mm is required for the cable. Mount it on a wheel door, or on an engine bay door for the least amount impact on the airframe, and maximum visibility.

FuselageFlasher comes together with AeroFlash Fusion.

fuseflash-side-1 copy

Fusion

fusion-back-1000

Power Supply and Data Processing

The power supply for FuselageFlasher.

Built in a sturdy aluminium RF-shielded enclosure.

Overheat protection built-in.

Mount it at your preferred location.

Easy to install. No soldering required.

Fusion
-noun
“the result of joining two or more objects together to form a single entity”

Nexus’ little brother, Fusion, is the heart for the control of the FuselageFlasher.

Fusion systems are available in six variants, suitable for every installation. Combine it with a CanopyFlasher/Nexus system? Would you like Flarm input? Completely stand-alone?

Always a perfect solution for your individual installation.

fusion-duo1-1000

Easy Connectivity

Easy to connect screw-on terminals to connect the three power wires from each FuselageFlasher.

4-pin Molex connector for Nexus or AUTO/ON mode switch input.

Easily connect a second FuselageFlasher with Fusion DUO.

Stand-alone LITE or FLARM versions available.

Single-FuselageFlasher Fusion systems are available in three different variants, suitable for every installation:

Fusion – MUST be connected to a CanopyFlasher / Nexus system. Can be connected with Flarm only via Nexus.

Fusion LITE – stand-alone version, NOT connectable to Flarm or Nexus. Flashes continuously with 3-flashes per 1,5 second.

Fusion FLARM – connectable to Flarm (1x RJ12 IGC port), NOT connectable to Nexus/CanopyFlasher. Switchable enhanced AUTO- or Always-ON logic.

Double (DUO)-FuselageFlasher Fusion systems are available in three different variants, suitable for every installation:

Fusion DUO – MUST be connected to a CanopyFlasher / Nexus system. Can be connected with Flarm only via Nexus. Connects two FuselageFlashers to one single powerbox.

Fusion DUO LITE – stand-alone version, NOT connectable to Flarm or Nexus. Flashes continuously with 3-flashes per 1 to 2,5 seconds (configurable). Connects up to two FuselageFlashers to one single powerbox.

Fusion DUO FLARM – connectable to Flarm (1x RJ12 IGC port), NOT connectable to Nexus/CanopyFlasher. Switchable enhanced AUTO- or Always-ON logic. Connects up to two FuselageFlashers to one single powerbox.

Convinced?

Order now!

The AeroFlash systems are available for sale in our shop, or through one of your preferred dealers.

If your glider type is not listed in the compatibility yet, please contact us.

Do you have any questions?

Don’t hesitate to contact us, or read the frequently asked questions section for more information.

info@aeroflash.de