Description
FuselageFlasher DUO
Elegant and aerodynamic. 360º.
On top and bottom. Choose your colors.

Measuring at 110mm long, 15mm wide and only 11mm high, the AeroFlash FuselageFlasher is extremely elegant and streamlined, made out of a super clear UV-resistant epoxy. Its small size does not say much about its ability: with 16, yes sixteen extremely bright red or white CREE™ LEDs (±7500-8500 Lumen!), the strobe is very well visible at distances up to 3km.
Mount one on top of the fuselage and one on the bottom. Choose your colors. Easily connect up to two FuselageFlashers to Fusion DUO and Nexus. No compromise. Only one small hole of 4mm is required for the cable. Mount it on a wheel door, or on an engine bay door for the least amount impact on the airframe, and maximum visibility.
FuselageFlasher comes together with AeroFlash Fusion DUO (LITE / FLARM):



Fusion – power box – the heart of the FuselageFlasher
Nexus’ little brother, Fusion, is the heart for the control of the FuselageFlasher.
A compact, sturdy aluminium enclosure fits everything FuselageFlasher requires: power supply, data processing and overheat protection. Mount it at your preferred location.
Double-FuselageFlasher Fusion systems are available in three different variants, suitable for every installation:
Fusion DUO – MUST be connected to Nexus – add a CanopyFlasher / Nexus system separately. Can be connected with Flarm only via Nexus. Connects two FuselageFlashers to one single powerbox.
(This is the standard option when ordering a complete CanopyFlasher + double FuselageFlasher system).
Fusion DUO LITE – stand-alone version, NOT connectable to Flarm or Nexus. Flashes continuously with 3-flashes per 1 to 2,5 seconds (configurable). Connects up to two FuselageFlashers to one single powerbox.
Fusion DUO FLARM – connectable to Flarm (1x RJ12 IGC port), NOT connectable to Nexus/CanopyFlasher. Switchable enhanced AUTO- or Always-ON logic. Connects up to two FuselageFlashers to one single powerbox.
For single-FuselageFlasher systems, see FuselageFlasher + Fusion sets here.
Red or white LEDs? Your choice…
Let’s explain the pros and cons:
Red:
+ Better visibility of a white glider against a grey/white background. This is the most dangerous situation. Red clearly stands out.
+ Red means danger.
– Slightly less brightness (±7500 lumen) than white LEDs.
White:
+ Slightly better brightness (±8500 lumen) compared to red LEDs.
+ Better visibility against a brown/green background.
– Reduced visibility of a white glider against a grey/white background (in clouds, haziness, snowy terrain, etc).
Conclusion:
We recommend RED for bottom mounted FuselageFlashers.
We recommend WHITE for top mounted FuselageFlashers.


FuselageFlasher with 4m wiring pre-attached

Fusion DUO

Fusion DUO FLARM includes an ACL OFF/AUTO/ON -logic switch with label/marking

Fusion DUO LITE includes an ACL OFF/ON switch with label/marking
Scope of Delivery
1x Fusion DUO device (DUO FLARM, DUO LITE or standard/Nexus-version).
1x Fusion DUO FLARM/LITE cable set with switch*.
2x FuselageFlasher, white or red, with 3M double sided adhesive foam tape pre-applied.
2x 4 meter pre-attached AWG20 wiring (3 wires: red, red, black) – other lengths available on request.
*(in case of Fusion DUO LITE: 1x ACL ON/OFF switch with label/marking is included).
*(in case of Fusion DUO FLARM: 1x ACL OFF/AUTO/ON switch with label/marking and a 3-way Flarm Splitter are included).
Optionally:
Data extension cable from Nexus to Fusion DUO, 4m available.
Extra power cable, 18AWG, red and blue available here.
NOT included:
Fuse/circuit breaker, 3A – available from us separately.
Silicone sealant/kit (for weather-proofing the FuselageFlasher).
Additional power cable.
Crimp or soldering tools.
Cable ties.


Reviews
There are no reviews yet.