AeroFlash RUDOLPH NoseFlasher

449,00549,00

Clear
Category: SKU: N/A

Description

RUDOLPH

 

Designed for Ka-6, Ka-8 and ASK13 gliders.

Measuring at 60mm diameter (hole diameter 32mm), 7mm high, the AeroFlash RUDOLPH NoseFlasher is extremely elegant and streamlined and fits around the nose-hole of the Ka6, Ka8 and ASK13 gliders, that don’t really have a good solution to install a CanopyFlasher. Just like the FuselageFlasher, it’s made out of a super clear UV-resistant epoxy. Its small size does not say much about its ability: with 16, yes sixteen extremely bright red or white CREE™ LEDs (±7500-8500 Lumen!), the strobe is very well visible at distances up to 3km.

Only one small hole of 4mm is required for the cable.

RUDOLPH NoseFlasher set comes together with AeroFlash Fusion (LITE / FLARM):

fusionfront-trans-500

Fusion – power box – the heart of the Rudolph NoseFlasher

A compact, sturdy aluminium enclosure fits everything Rudolph NoseFlasher requires: power supply, data processing and overheat protection. Mount it at your preferred location.

Rudolph NoseFlasher – Fusion systems are available in two different variants:

Fusion LITE – stand-alone version, NOT connectable to Flarm or Nexus. Flashes continuously with 3-flashes per 1,5 second.

Fusion FLARM – connectable to Flarm (1x RJ12 IGC port). Switchable enhanced AUTO-, Always-ON and HAZARD mode logic.

Red or white LEDs? Your choice…

Let’s explain the pros and cons:

Red:

+ Better visibility of a white glider against a grey/white background. This is the most dangerous situation. Red clearly stands out.

+ Red means danger.

– Slightly less brightness (±7500 lumen) than white LEDs.

White:

+ Slightly better brightness (±8500 lumen) compared to red LEDs.

+ Better visibility against a brown/green background.

– Reduced visibility of a white glider against a grey/white background (in clouds, haziness, snowy terrain, etc).

rudolph-frontabove1000p

Scope of Delivery

1x Fusion device (FLARM or LITE version)
1x Rudolph NoseFlasher (select LED color).
1x Cable set with switch* pre-attached.
2 meter pre-attached AWG20 wiring (3 wires: red, red, black) – other lengths available on request.
1x pre-cut 3M Dual Lock adhesive tape for mounting of Fusion.

*in case of Fusion LITE: 1x ACL OFF/SLOW/FAST (or reverse side: OFF/LOW/HIGH) switch with label/marking is included.
*in case of Fusion FLARM: 1x ACL OFF/AUTO/ON switch with label/marking and a 3-way Flarm Splitter are included).

NOT included:
Fuse/circuit breaker, 2 or 3A – available from us separately.
Silicone sealant/mounting kit (for mounting and weather-proofing the NoseFlasher installation).
Additional power cable.
Crimp or soldering tools.
Cable ties.

Additional information

LED quantity

16

LED color

Red, ±7500 Lumen, White, ±8500 lumen

Brightness

±7500 lumen, ±8500 lumen

Overheat protection

Yes, limited temperature protection logic (on-ground sensing)

Reviews

There are no reviews yet.

Be the first to review “AeroFlash RUDOLPH NoseFlasher”

Your email address will not be published. Required fields are marked *

Post comment

You may also like…